SilencerTalk

Sound Suppressor Discussion
It is currently Thu Jul 24, 2014 6:39 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Silencing a Robinson Arms XCR micro
PostPosted: Mon May 02, 2011 6:45 am 
Offline
Member

Joined: Wed Feb 09, 2011 4:59 pm
Posts: 48
Like to know if anybody used a suppressor with a RobArms XCR rifle and how was the performance as to suppression? Compare to a M4/M16


Top
 Profile  
 
 Post subject: Re: Silencing a Robinson Arms XCR micro
PostPosted: Mon May 02, 2011 10:27 am 
Offline
Silent But Deadly
User avatar

Joined: Tue Mar 15, 2011 2:49 pm
Posts: 540
I'd like to hear some info on this too because I've been contemplating putting a can on my 9" XCR Mini but just haven't gotten around to it yet, too many current NFA projects...


Top
 Profile  
 
 Post subject: Re: Silencing a Robinson Arms XCR micro
PostPosted: Mon May 02, 2011 8:08 pm 
Offline
Silent But Deadly

Joined: Fri Nov 19, 2010 10:55 pm
Posts: 248
i'm willing to bet it'd be pretty damn loud due to the piston and the short barrel

_________________
Don't be an internet tough guy...


Top
 Profile  
 
 Post subject: Re: Silencing a Robinson Arms XCR micro
PostPosted: Mon May 02, 2011 11:46 pm 
Offline
Elite Member
User avatar

Joined: Sun Sep 07, 2008 1:32 am
Posts: 1790
Location: KY
its probably not able to stabilize the round in a barrel that short. i know with G36k's you can have some end cap strikes


Top
 Profile  
 
 Post subject: Re: Silencing a Robinson Arms XCR micro
PostPosted: Tue May 03, 2011 1:42 am 
Offline
Senior Silent Operator

Joined: Fri Oct 09, 2009 12:34 am
Posts: 101
Although not a micro i suppress a 11 inch 7.62x39 with a 7.62sd and it works out quite nice


Top
 Profile  
 
 Post subject: Re: Silencing a Robinson Arms XCR micro
PostPosted: Tue May 03, 2011 11:40 am 
Offline
Member

Joined: Wed Feb 09, 2011 4:59 pm
Posts: 48
MCFLURY wrote:
Although not a micro i suppress a 11 inch 7.62x39 with a 7.62sd and it works out quite nice


Nice to know.Do you have to adjust the regulator to be used with the suppressor?

Might sound dumb :lol: , but have you tried it without hearing protection?


Top
 Profile  
 
 Post subject: Re: Silencing a Robinson Arms XCR micro
PostPosted: Tue May 03, 2011 11:16 pm 
Offline
Member

Joined: Tue Dec 02, 2008 10:33 pm
Posts: 16
bunker168 wrote:
MCFLURY wrote:
Although not a micro i suppress a 11 inch 7.62x39 with a 7.62sd and it works out quite nice


Nice to know.Do you have to adjust the regulator to be used with the suppressor?

Might sound dumb :lol: , but have you tried it without hearing protection?



I am waiting on my form 1 to come back so I can chop my barrel, but my 16inch XCR in 7.62x39 was much more pleasant to shoot than a 16 inch ar-15. I most definitely have to turn my gas regulator all the way down or I will never find my casings. I shot it without hearing protection in a semi enclosed space and it wasn't unpleasant at all.


Top
 Profile  
 
 Post subject: Re: Silencing a Robinson Arms XCR micro
PostPosted: Tue May 03, 2011 11:34 pm 
Offline
Industry Professional
User avatar

Joined: Sat Jan 07, 2006 9:19 pm
Posts: 9935
Location: North Carolina
stonersr26 wrote:
bunker168 wrote:
MCFLURY wrote:
Although not a micro i suppress a 11 inch 7.62x39 with a 7.62sd and it works out quite nice


Nice to know.Do you have to adjust the regulator to be used with the suppressor?

Might sound dumb :lol: , but have you tried it without hearing protection?



I am waiting on my form 1 to come back so I can chop my barrel, but my 16inch XCR in 7.62x39 was much more pleasant to shoot than a 16 inch ar-15. I most definitely have to turn my gas regulator all the way down or I will never find my casings. I shot it without hearing protection in a semi enclosed space and it wasn't unpleasant at all.


I have a 10 inch XCR Factory SBR and its loud as $%(* suppressed, my LWRCI piston 10.5 is a ton quieter. I regret getting the XCR, been nothing but problems since day one!

-B


Top
 Profile  
 
 Post subject: Re: Silencing a Robinson Arms XCR micro
PostPosted: Wed May 04, 2011 4:23 pm 
Offline
Member

Joined: Wed Feb 09, 2011 4:59 pm
Posts: 48
@Bendersquint

Can you expand the problems that you are having with the Robarms XCR? I am at a point that I plan to purchase this SBR to be used with a suppressor. Your input would be a great help. I am also considering LWRC rifles. Problem is the cost.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: AggiePhil, BadgerArms, Baronvonphildo, bassjacker, BigWonton, ChimeraPrecision, clark4283, cs78, Deja vu, deputyonce, doubloon, dragoon, Flipz, Get-to-tha-choppa, GHEN, jcox199, jurist, kiwi tinkerer, misternt, pneumagger, RDIAS, rimshaker, SENTINELDFA, Shootsmith, tcba_joe, TheSkrich, tripntx, Warp, zevdogs and 1140 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group